Fire Sprinkler Extension Brass 1" L x 3/4" IPS **NO WARRANTY-USE AT YOUR OWN RISK
SKU
6520247
Fire Sprinkler Extension Brass 1" x 3/4" IPS
Fire Sprinkler Extension Brass 1" L x 3/4" IPS **NO WARRANTY-USE AT YOUR OWN RISK is available to buy in increments of 20
Weight (ea): 0.2 lbs
1" Long x 3/4" IPS Brass Sprinkler Extension
Designed to be used to correct sprinkler head elevation without removing or re-cutting sprinkler drop.
Material: Brass* - B16
* Contains lead. Not for use in water systems intended for human consumption.
THIS PRODUCT IS COVERED BY ADDITIONAL DISCLAIMERS REGARDING SUITABILITY AND USE. PURCHASER AND USER TAKE FULL RESPONSIBILITY FOR THE USE OF THIS PRODUCT. ARGCO WILL NOT BE HELD LIABLE FOR PRODUCT FAILURE OR DAMAGE CAUSED BY USE. SEE TECH DATA SHEET FOR DETAILS.
Click here for Technical Data (PDF)
THIS PRODUCT IS SOLD AS IS AND WITH ALL FAULTS. PROPER INSTALLATION IS REQUIRED TO AVOID RISK OF FAILURE.
ARGCO MAKES NO WARRANTY OF ANY KIND FOR THIS PRODUCT. USE THIS PRODUCT AT YOUR OWN RISK. ARGCO WILL NOT PROVIDE FOR REPLACEMENT OF THIS PRODUCT NOR WILL WE BE RESPONSIBLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.
This product should only be used when no other installation option is available and then only installed under controlled and supervised conditions.This product has neither been tested nor approved by any agency or authority as being a universally accepted product for the extension of sprinklers. Proper installation requires the proper use of tools and an adequate amount of thread sealant as well as mating the extensions with properly threaded components.
Over-tightening will cause failure of the brass sprinkler extensions in almost every case.
Evidence of failure may not be visible by inspection and the absence of apparent leaks during hydro-testing may not reveal product failure.
By installing this product you acknowledge that you accept responsibility for use of this product.
Designed to be used to correct sprinkler head elevation without removing or re-cutting sprinkler drop.
Material: Brass* - B16
* Contains lead. Not for use in water systems intended for human consumption.
THIS PRODUCT IS COVERED BY ADDITIONAL DISCLAIMERS REGARDING SUITABILITY AND USE. PURCHASER AND USER TAKE FULL RESPONSIBILITY FOR THE USE OF THIS PRODUCT. ARGCO WILL NOT BE HELD LIABLE FOR PRODUCT FAILURE OR DAMAGE CAUSED BY USE. SEE TECH DATA SHEET FOR DETAILS.
Click here for Technical Data (PDF)
THIS PRODUCT IS SOLD AS IS AND WITH ALL FAULTS. PROPER INSTALLATION IS REQUIRED TO AVOID RISK OF FAILURE.
ARGCO MAKES NO WARRANTY OF ANY KIND FOR THIS PRODUCT. USE THIS PRODUCT AT YOUR OWN RISK. ARGCO WILL NOT PROVIDE FOR REPLACEMENT OF THIS PRODUCT NOR WILL WE BE RESPONSIBLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.
This product should only be used when no other installation option is available and then only installed under controlled and supervised conditions.This product has neither been tested nor approved by any agency or authority as being a universally accepted product for the extension of sprinklers. Proper installation requires the proper use of tools and an adequate amount of thread sealant as well as mating the extensions with properly threaded components.
Over-tightening will cause failure of the brass sprinkler extensions in almost every case.
Evidence of failure may not be visible by inspection and the absence of apparent leaks during hydro-testing may not reveal product failure.
By installing this product you acknowledge that you accept responsibility for use of this product.
California Prop 65 WARNING
WARNING: This product can expose you to chemicals and or materials that are recognized by the State of California to cause cancer or reproductive harm. For more information, go to www.p65warnings.ca.gov
Technical data are not available for this product.
| Weight | 0.240000 |
|---|
No videos are available for this product.
